Replacing LED rear light
with LED rear light
OE
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replacing bulbs for front
and rear turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1.
Pull the glass out of the bulb
housing at the threaded-
fastener side.
Turn bulb 2 for the turn indic-
ator counter-clockwise and re-
move it from the bulb housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
OE
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
OE
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of foreign matter.
8
99
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
