Seat
Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key to the left in seat
lock 1 and hold it in this pos-
ition while pressing down the
rear part of the seat.
Lift the seat at the rear and
release the key.
Remove the seat and place it,
upholstered side down, on a
clean surface.
Installing seat
Engage the seat in holder 2.
Firmly press down on the seat
at the rear.
The seat engages with an aud-
ible click.
4
49
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
