Ignition and steering
lock
Keys
This motorcycle does not have
an ignition switch. You receive
two keys for the steering lock.
Switching on ignition
Push full-beam switch 1 up
and then operate headlight-
flasher button 2.
The instrument panel is
activated automatically as
soon as the motorcycle moves
away from rest.
High-beam headlight and all
function circuits switched on.
Push full-beam headlight
switch 1 down.
High-beam headlight switched
off.
Alternatively: Briefly press
starter button 2.
Low-beam headlight and all
function circuits switched on.
The engine will start if the
starter button is not released
after being pressed only briefly.
Switch off the ignition
The ignition switches off auto-
matically shortly after the motor-
cycle is brought to a standstill.
Locking handlebars
Turn the handlebars all the way
to the left
Pivot cover 1 aside.
Use key 2 to turn the steering
lock clockwise, while moving
the handlebars slightly.
Handlebars locked.
Remove the key and pivot the
cover into position over the
lock.
4
22
z
Operation
To Next Page
Loading...
Need help?
General
