Mirrors
Adjusting mirrors
Pivot the mirror to the cor-
rect position by pressing
gently at the edge.
Adjusting mirror arm
Push protective cap 1 up
over the threaded fastener
on the mirror arm.
Slacken nut 2.
Turn the mirror arm to the
appropriate position.
Tighten nut 2, while hold-
ing the mirror arm to ensure
that it does not move out of
position.
Mirror to clamping
piece
25 Nm
Push protective cap 1 over
the threaded fastener.
Pneumatic pump
Use
You can use the pump to
check the pressure in the
Air Damping System ( 45)
and in the tyres, and increase
pressure when necessary.
Removing pneumatic
pump
Release the pump from the
retaining clip.
4
44
z
Operation
To Next Page
Loading...
Need help?
General
