Turn indicators
Removing front right turn
indicator
Make sure ground is level and
firm and park motorcycle.
Disconnect connector 1.
To disconnect the con-
nector: grasp the cable
close to the front connector, first
pull toward the inside and then
forward.
Remove cable tie 2.
Brace nut 3 in next step.
Remove screw 4.
Rotate turn indicator 90° and
remove.
Thread out cable.
Removing front left turn
indicator
Make sure ground is level and
firm and park motorcycle.
Disconnect connector 1.
To disconnect the con-
nector: grasp the cable
close to the lower connector, first
pull toward the inside and then
downward.
Remove cable tie 2.
Brace nut 3 in next step.
9
112
z
For the racetrack
To Next Page
Loading...
Need help?
General
