27
General information and controls
1
1
Handlebar-mounted remote
controls
L Note:
Use rocker switch 1 on the left han-
dlebar fitting to access the menu of
the on-board computer.
When you switch on the ignition
(ignition switch in the ON position),
the display initially shows the ambi-
ent temperature, before switching
to the reading that was displayed
before the ignition was switched
off.
• Each time you push rocker
switch 1 on the left handlebar
fitting in the BC direction for
less than 2 seconds, you step
from one function to the next in
the following sequence:
– Average road speed (
b 28)
– Press button 1 in the BC
direction for more than
2seconds to reset
–Residual range (
b 28)
– Average consumption 1
(
b 29)
– Average consumption 2
(
b 29)
– Press button 1 for more than
2 seconds in the "BC"
direction to reset average
consumption reading 1/2
– Ambient temperature (
b 30)
On-board computer
10LTbkg6.book Seite 27 Mittwoch, 16. Mai 2007 10:35 10