BMW k1200lt User Manual

3
70
Technical Data
Frame Chill-cast load-bearing aluminum
frame, welded from 4 sections;
engine mounted on frame by silent-
bloc bushings to prevent the trans-
mission of vibration.
Location of type plate On rear frame on right
(
b Rider’s Manual, Chapter 1)
Location of vehicle identifi-
cation number (VIN)
On rear frame, bottom right
(
b Rider’s Manual, Chapter 1)
Front brake Hydraulically operated twin disk
brake with 4-piston fixed calipers,
angular wear compensation and
floating stainless-steel brake disks.
Sintered metal brake pads
Rear brake Hydraulic disk brake with four-pis-
ton fixed caliper, angular pad wear
compensation and floating stain-
less-steel brake disk.
Organic brake pads
Brake system BMW Integral ABS, fully integral
Frame and suspension
20LTbku7.book Seite 70 Montag, 4. Juli 2005 9:27 09

BMW k1200lt Specifications

General

Displacement	1171 cc
Bore x Stroke	70.5 mm x 75 mm
Compression Ratio	10.8:1
Transmission	5-speed
Final Drive	Shaft drive
Front Tire	120/70 ZR17
Rear Tire	160/70 ZR17
Torque	115 Nm at 5, 250 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual 320 mm discs
Rear Brakes	Single 285 mm disc
Seat Height	800 mm (adjustable)
Fuel Capacity	24 liters
Engine Type	Liquid-cooled, 4-stroke, DOHC, inline-4