Turn adjusting screw 1
clockwise to increase the span
between the clutch lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the clutch
lever and the handlebar grip.
The adjusting screw is
easier to turn if you push
the clutch lever forward.
Brakes
Adjust the handbrake
lever
Changing the position of
the brake-fluid reservoir can
allow air to penetrate the brake
system.
Do not twist the handlebar fitting
or the handlebars.
Attempting to adjust the
handbrake lever while riding
the motorcycle can lead to acci-
dents.
Do not attempt to adjust the
handbrake lever unless the mo-
torcycle is at a standstill.
Turn adjusting screw 1
clockwise to increase the span
between the brake lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the brake
lever and the handlebar grip.
The adjusting screw is
easier to turn if you push
the handbrake lever forward.
Adjust the footbrake lever
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
4
52
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
