Press and hold down the but-
ton until the hours number 3
flashes.
Repeatedly press the button
until the hours number is cor-
rect.
Press and hold down the but-
ton until the minutes number 4
flashes.
Repeatedly press the button
until the minutes number is
correct.
Hold down the button until the
minutes number stops flashing.
This completes the process.
Reading
Selecting readings
Switch on the ignition.
without on-board computer
OE
without tyre pressure monitor-
ing (RDC)
OE
Press button 1 or button 2 to
select a tripmeter reading in
panel 3.
The following values can be dis-
played:
Total distance covered
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
Residual range (once fuel level
is down to reserve)
with on-board computer
OE
or
with tyre pressure monitoring
(RDC)
OE
Press button 2 to select a trip-
meter reading in panel 3.
The following values can be dis-
played:
Total distance covered
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
4
43
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
