a Neutral position
b Position for heavy load
Front and rear seats
Remove the rear seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the key clockwise in seat
lock 1 and hold it in this pos-
ition while pressing down the
front part of rear seat 2.
Lift the rear seat at the front
and release the key.
Remove the rear seat and
place it, upholstered side down,
on a clean surface.
Remove the front seat
Remove the rear seat ( 62).
Turn the key counter-clock-
wise in seat lock 1 and hold
it in this position while press-
ing down the rear part of front
seat 3.
Lift the front seat at the rear
and release the key.
Remove the front seat and
place it, upholstered side down,
on a clean surface.
4
62
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
