with seat heating
OE
Disengage the latch and dis-
connect plug 3.
Remove the front seat and
place it, upholstered side down,
on a clean surface.
Install the front seat
with seat heating
OE
Connect plug 3.
Push the front seat into seat
supporting rod 4. Make sure
that the seat is correctly loc-
ated.
If you install the seat in the low
position, check that the seat's
rubber buffers 5 are in the bot-
tom positions in mounts 6.
Firmly press the front seat into
the mounts.
Install the rear seat ( 61).
Install the rear seat
Install the front seat ( 61).
4
61
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
