Bosch BP Series User Manual

Subject to change without prior notice Revised 05-12
6 720 220 045
18
CP/BP Series
UNIT SPECIFICATIONS
Table 4: Physical Data
Model
Front
Clearance
(in.)
Water Coil
Volume
(gals.)
Installation Weight
(Vertical / Horizontal)
(lbs.)
Shipping Weight
(Vertical / Horizontal)
(lbs.)
BP007
36 0.46 140 / 165 160 / 185
BP009
36 0.46 154 / 172 174 / 192
BP012
36 0.66 166 / 173 186 / 205
BP015
36 0.66 191 / 190 208 / 218
BP018
36 0.66 195 / 198 212 / 222
CP/BP024
36 0.81 229 / 307 242 / 340
CP/BP030
36 1.14 269 / 358 292 / 404
CP/BP036
36 1.14 281 / 369 304 / 415
CP/BP042
36 1.11 334 / 400 360 / 465
CP/BP048
36 1.11 340 /405 366 / 470
CP/BP060
36 1.13 396 / 452 422 / 520
CP/BP070
36 2.27 444 / 494 470 / 562
IN-WARRANTY MATERIAL RETURN
When contacting your Representative for service or
replacement parts, refer to the model and serial
number of the unit as stamped on the data plate
attached to the unit.
Material may be returned to the factory only with
permission of an authorized factory representative. A
“Warranty Return Material” tag must be attached to
the returned material. Assure that all of the information
as called for on the tag is  lled out completely and
accurately to expedite handling and insure prompt
issuance of credits.
In-Warranty Material Return
Freight charges for all items returned to the factory
shall be prepaid. The return of the part does not
constitute an order for a replacement. Therefore, a
purchase order must be entered through your nearest
representative. The order shall include the part
number, model number, and serial number of the unit
involved. If the part is within the warranty period, and
after our inspection of the returned part proves that
the failure is due to faulty material or workmanship a
credit or replacement part will be issued.
Caution
Parts returned without a completed “Warranty
Return Material” tag will not be credited.

Bosch BP Series Specifications

General

Brand	Bosch
Model	BP Series
Category	Heat Pump
Language	English