10 | English
Digital laser measure GLM 30-23
Rechargeable batteries 2×1.2V HR03
(AAA)
A) When measuring from the back edge of the measuring tool, this
applies for high reflectivity of the target (e.g. a wall painted white),
weak background lighting and a 20°C operating temperature; a
distance-dependent deviation of ±0.05mm/m must additionally
be factored in.
B) When measuring from the back edge of the measuring tool, this
applies for high reflectivity of the target (e.g. a wall painted white),
strong background lighting, 20°C operating temperature and high
elevation. In addition, a deviation of ±0.15mm/m must be taken
into account, depending on the distance.
C) Only non-conductive deposits occur, whereby occasional tempor-
ary conductivity caused by condensation is expected.
The serial number (8) on the type plate is used to clearly identify your
measuring tool.
Inserting/Changing the Battery
Using alkali-manganese or nickel metal hydride rechargeable
batteries (especially at low operating temperatures) is recom-
mended for operation of the measuring tool.
With 1.2 V rechargeable batteries, more measurements may
be possible than with 1.5 V batteries, depending on the capa-
city.
Open the battery compartment cover.
Insert the batteries/rechargeable batteries.
Always replace all the batteries/rechargeable batteries
at the same time. Only use batteries/rechargeable bat-
teries from the same manufacturer and which have the same
capacity.
1 609 92A 82K | (20.12.2022) Bosch Power Tools