English | 17
Select a measuring section of approx.1 to10m long, the
length of which you know exactly (e.g. room width, door-
way).
Measure the section 10 times in succession.
The deviation of individual measurements from the exact
known value may be maximum ±2mm throughout the en-
tire measuring section under favourable conditions. Log
the measurements, so that you can compare their accuracy
at a later point of time.
Error Message
If a measurement cannot be performed correctly, the error
messageError will appear in the display.
Try to perform the measuring process again.
If the error message appears again, switch the measuring
tool off and back on, and start the measurement again.
The measuring tool monitors correct operation in
every measurement. If a defect is detected, the dis-
play will indicate only the symbol shown opposite
and the measuring tool switches itself off. In this
case, have the measuring tool checked by an after-sales ser-
vice agent for Bosch power tools.
Bosch Power Tools 1 609 92A 82K | (20.12.2022)
To Next Page
Loading...
Need help?
General
