Bosch WQG24500BY User Manual

en Appliance care
36
15.3 Starting the appliance
care programme
Requirements
¡ The appliance is ready to run the
appliance care programme.
→"Preparing the appliance for the
appliance care programme ",
Page34.
¡ The condensation container is
ready for the appliance care pro-
gramme.
→"Preparing the condensation
container for the appliance care
programme", Page35.
1. Set the programme to position1.
2. Press and hold ⁠ Iron Dry.
3. Set the programme to position4.
a "CP1"and the programme duration
alternate on the display.
15.4 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note:After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "CrE" for 5
seconds. The note is shown re-
peatedly until the basic appliance
care programme has been run com-
pletely.
Requirements
¡ The appliance is ready to run the
appliance care programme.
→"Preparing the appliance for the
appliance care programme ",
Page34.
¡ The appliance care programme
has started.
→"Starting the appliance care pro-
gramme", Page36
1. Add approx. 1½ litres of hot tap
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
2. Insert the condensation container
so that it locks into place.
3. Press ⁠ Start/Reload.

Bosch WQG24500BY Specifications

General

Brand	Bosch
Model	WQG24500BY
Category	Dryer
Language	English