en Cleaning and servicing
42
4. Clean the insert under running wa-
ter and dry it off.
5. Clean the opening with a soft,
damp cloth.
6. Slide the insert in horizontally as
far as it will go.
7.
Close the base unit →Page42.
Closing the base unit
Requirement:The base unit is open.
→"Opening the base unit", Page41
1. Insert the heat exchanger cover by
the handle.
2. Close the lever for the heat ex-
changer.
3. Close the maintenance flap.
16.3 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
To Next Page
Loading...
Need help?
General
