en Appliance care
38
Requirements
¡ The appliance is ready to run the
appliance care programme.
→"Preparing the appliance for the
appliance care programme ",
Page34
¡ The appliance care programme
has started.
→"Starting the appliance care pro-
gramme", Page36
▶ Press .
a "CP2"and the programme duration
alternate on the display.
15.6 Running the intensive
appliance care pro-
gramme
1. Pull out the condensation con-
tainer horizontally and empty it.
2. Pour a bottle of the original appli-
ance care product
→"Accessories", Page29 and ap-
prox.1½litres of warm tap water
into the condensation container.
Hold the full condensation con-
tainer level so that no liquid spills
out.
3. Insert the condensation container
so that it locks into place.
4. Press Start/Reload. The appli-
ance care programme starts and
an audible signal sounds.
After around 3hours, the appli-
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
To Next Page
Loading...
Need help?
General
