Bose CineMate 130 User Manual

20 - English
Finishing Setup
Running the ADAPTiQ
®
audio calibration
The ADAPTiQ audio calibration customizes the sound of the system to the
acoustics of your listening area by taking five audio measurements. To perform
an audio calibration, you need 10 minutes when the room is quiet.
1. Put the ADAPTiQ headset on your head.
During the ADAPTiQ audio calibration, a microphone on the top of the
headset measures the sound characteristics of your room to determine
optimal sound quality.
2. Insert the ADAPTiQ headset cable into the connector on the console.
3. Press
on the remote control.
4. Press
until 14 ADAPTiQ appears on the display.
5. Press
.
6. Follow the voice prompts until the system completes the process.
7. Unplug the ADAPTiQ headset from the console and store it in a safe place.
Note: If you move the system or any furniture, run ADAPTiQ again to ensure
optimal sound quality.

Bose CineMate 130 Specifications

General

Disc types supported	No
Optical disc player type	Not included
Internet radio	Yes
Apple docking compatibility	-
RMS rated power	- W
Audio output channels	- channels
Subwoofer type	Active subwoofer
Product color	Black
HDMI in	4
Number of HDMI outputs	1
AC input voltage	100-240 V
Package weight	20000 g

Weight and Dimensions

Main unit weight	1490 g
Subwoofer weight	6300 g
Center speaker weight	3500 g
Main unit dimensions (WxDxH)	313 x 208 x 64 mm
Subwoofer dimensions (WxDxH)	197 x 286 x 375 mm
Center speaker dimensions (WxDxH)	935 x 61 x 124 mm