Bose ControlSpace AMS-8 Software Guide

English
15
1. ControlSpace
™
AMS-8 LIVE Installer Software
1.6.1 Standby event
A Standby event can be used to turn the system rack On or Off at a certain time and day. In below module
one can change the Time, select the day(s) the event should take place and select between System Standby
and System Active. One is able to set ‘User Selectable’ to active and ‘Default Active’ to on.
Press the following buttons to:
(days) show and select the days (from the info field) required for this event
select a ‘power on’ or ‘power off’ action for this event
change the activation time for this event
1.6.2 Preset event
A preset event can be used to turn a pre-configured Room Combining preset On and Off at a certain time
and day. In below module one can change the Start and End time, select the day(s) this event should take
place and select which Room Combining preset (1..40) should be activated.
Press the following buttons to:
(days) show and select the days
(from the info field) required
for this event
(lower) select a pre-configured
preset (1...40)
change the activation time
for this event

Bose ControlSpace AMS-8 Specifications

General

Brand	Bose
Model	ControlSpace AMS-8
Category	Stereo System
Language	English