To Next Page

To Previous Page

Info Field

English

With this module one can change the source names (12 characters max.), the input type (to Audio, Paging,

Message or Aux/Mic), adjust each input gain to level all the connected sources, increase/decrease the bass

& treble level on the input (not possible with the analogue card CS-TIC) and change the inputs from mono

to stereo. In this module one can also define to which room (on the master or slave rack) the optional Local

Input Module is connected to. The first two inputs on the system rack are fixed and set as ‘Audio’ input.

1.2 Input Settings

1. ControlSpace

™

AMS-8 LIVE Installer Software

Press or use the following buttons or faders to:

change or enter the name of a connected source

switch from a mono to a stereo source (mono Icon)

switch from a stereo to a mono source (stereo Icon)

switch between optical and coaxial input (only used for Digital Input Card)

change the input to an ‘Audio’ input (e.g. when an analogue source is used)

change the input to a ‘Paging’ input (to connect the AMS-8 paging panel)

change the input to a ‘Message’ input (to connect an external Message player)

change the input to an ‘Aux/Mic’ input (to connect a Local Input Module)*

select a Source, from the Source list shown in the info field, which needs to be configured.

To select a source: click once on one of the listed sources

change or view the level of the input gain

Upload the new Input settings to the AMS-8 system rack

(only possible if this button is highlighted in RED)

adjust the Bass and Treble level (between -82dB & +18dB) on the input card (only in combination

with the optional Digital Input Card, Message Storage Card and Twin Tuner Card)

1.2.1 Input Module

Bose ControlSpace AMS-8 Software Guide

Other manuals for Bose ControlSpace AMS-8