Bose ControlSpace AMS-8 Software Guide

Info Field
18
English
1. ControlSpace
™
AMS-8 LIVE Installer Software
1.7 FM Tuner module
If the Twin Tuner Card is installed, below module can be used to configure and change the Tuner settings.
This module will display the Input name, channel frequency, signal strength and RDS information.
The RDS information can be used to look up the name of the Radio station which can be used to enter
as a name for the stored Tuner preset.
Press the following buttons to:
(upper) select the a tuner (nr. depends on the nr. of installed Twin Tuners Cards)
(lower) select a tuner preset (1...40) from the info field
lower the frequency with one step
seek the previous radio station
seek the next radio station
increase the frequency with one step
store a preset in the preset list. If this button is pressed one should select a preset nr. from the info
field. After this the following window is opened to enter a new name for the preset Station
(Press OK to confirm the new name):
upload the new Tuner presets to the AMS-8 system rack
change the name of a manual selected (not stored/temporary) Tuner frequency. As long as no
other Preset is selected this frequency will be played. The following window will open to enter a
name for this temporary Radio Station (Press OK to confirm the new name):

Bose ControlSpace AMS-8 Specifications

General

Brand	Bose
Model	ControlSpace AMS-8
Category	Stereo System
Language	English