Bose FreeSpace DS 100SE Service Manual

4
SPECIFICATIONS
FreeSpace
®
DS 100F Flush-Mount Loudspeaker
Electrical
Loudspeaker Impedance: 8 ohms
Power Handling: 100 Watts.
Transformer Taps in 70V Mode: 12.5, 25, 50 and 100W
Transformer Taps in100V Mode: 25, 50 and 100W
Bypass Mode: 8 Ohms
Acoustical
Sensitivity: 85 dB SPL @1W/1m
Maximum Sound Pressure Level: 105 dB SPL @ 1m (pink noise)
Frequency Range: 55Hz - 16kHz
Radiation Pattern: 160 degrees conical averaged from
800 Hz to 5 kHz.
Compression: <3 dB with 100W watt sine wave
Distortion: <30% at 200W sine wave
Port Noise: < -40dB (from fundamental)
Mechanical
Dimensions: Single Speaker: 11"H x 7.5"D (28 x 19 cm)
Packed System: 14"L x 14"W x 12.5"H (35.5 x 35.5 x 31.8 cm)
System Weight: Single Speaker: 11.5 lb (5.2 kg)
Packed System: 15 lb (6.8 kg)

Bose FreeSpace DS 100SE Specifications

General

Certification	CE, IEC 529
Product color	White
Housing material	Acrylonitrile butadiene styrene (ABS)
Recommended usage	-
Suitable for outdoor use	Yes
Driver diameter	57 mm
Woofer diameter	133 mm
Number of drivers	2
Speaker enclosure	Ported
Speaker placement	Ceiling-mountable, Wall-mountable
Audio output channels	1.0 channels
Woofer diameter (imperial)	5.25 \
Impedance	8 Ω
Sensitivity	85 dB
Frequency range	75 - 18000 Hz
RMS rated power	- W
Package weight	7700 g
Transformer taps	12.5, 25, 50, 100 W

Weight and Dimensions

Depth	216 mm
Width	381 mm
Height	178 mm
Weight	6400 g
Depth (with stand)	280 mm