Bose FreeSpace FS4SE Installation Guide

the screw.
Note: Before attaching the grille, adjust the loudspeaker tap settings to the appropriate setting for the installation. See
Loudspeaker Settings on page 5.
6. Locate the extended grille tab on the inside of the grille. Attach the grille by sliding it into place. Be sure the extended grille
tab attaches to the grille lock on the loudspeaker enclosure.
Removing the Grille
The grille is secured to the loudspeaker by the grille lock. Disengage the grille lock by inserting a small tool through the grille
perforation (no larger than 1.5 millimeters in diameter). While depressing the grille lock, slide the grille away from the loudspeaker
to detach it.
Note: The grille lock is located on the loudspeaker opposite of the tap switch. See the diagram below for the grille lock location.
Adjusting the Logo
The FreeSpace FS4SE comes with a pre-installed Bose logo for horizontal installations. The loudspeaker also comes with a
separate logo for vertical installations. To remove the logo, peal it away from the loudspeaker grille. To apply the vertical logo, find
the center of the grille and align the notches on the back of the logo with the grille perforation. Press to affix it to the loudspeaker
grille.
Safety and Regulatory Compliance
The Bose FreeSpace FS4SE loudspeaker has passed testing and complies with the following specifications and uses:
Listed to ANSI/UL 1480-2016, CAN/ULC-S541
Fire Protective Signaling Use – UL Category UUMW/UUMW7, File Number S 3241. Control Number 42S9.

Bose FreeSpace FS4SE Specifications

General

Backlight	No
Certification	IP55 UL 1480, ULC-S541
Product color	White
Housing material	Plastic, Steel
Recommended usage	Universal
Suitable for outdoor use	Yes
Operating temperature (T-T)	-25 - 70 °C
Package weight	8320 g
Connectivity technology	Wired
Impedance	8 Ω
Frequency range	70 - 19000 Hz
RMS rated power	40 W
Peak Music Power Output (PMPO)	160 W
Speaker type	Full range
Driver diameter	114 mm
Speaker placement	Tabletop/bookshelf, Wall-mountable
Audio output channels	- channels
Number of woofer drivers	1
Woofer diameter (imperial)	4.5 \
Transformer taps	2.5, 5, 10, 20, 40 W

Weight and Dimensions

Depth	174 mm
Width	171 mm
Height	277 mm
Weight	3420 g