ENGLISH - 19
CARE AND MAINTENANCE
Technical information
Headset impedance
Single earcup: 164 ohm
Dual earcup: 82 ohm
Headset sensitivity @ 1mW @1kHz
Single earcup: 108 dB SPL
Dual earcup (per ear-cup): 105 dB SPL
Microphone type: 150 ohm Dynamic Noise-Cancelling
Weight (not including cable)
Dual earcup: 12.7 oz.
Single earcup: 10 oz.
Cable length: 4 feet 10 inches to control module;
10 inches from control module to connector
4 pin female XLR connector: Pin 1 Microphone Low
Pin 2 Microphone High
Pin 3 Headphone High
Pin 4 Headphone Low
5 pin male XLR connector: Pin 1 Microphone Low
Pin 2 Microphone High
Pin 3 Audio_GND
Pin 4 Audio_L
Pin 5 Audio_R
Microphone shield is attached to connector clip.
To Next Page
Loading...
Need help?
General
