English - 17
Playing music with the SoundTouch™ controller
During the app set up process, the SoundTouch
™
controller was activated and a
wireless connection was established. You can use the SoundTouch
™
controller to
play and manage your presets.
Note: The SoundTouch
™
controller must be within 70 feet (21 m) of the
SoundTouch
™
wireless adapter in wood-construction homes.
In concrete, stucco or brick homes, the range will likely be less and
may vary. The number of other active wireless devices in the home
may affect range. Ideally, there should be no more than one wall or
ceiling between the controller and the wireless adapter.
Volume ring
Presets ring
Skip forward
Screen
Skip backward
SoundTouch
™
icon
Using the SoundTouch™ controller
s Press a preset to play it. Press and hold a preset to personalize it.
s Move your finger around the Presets ring to view presets.
s Turn the Volume ring to adjust the volume.
s Touch
or to skip through content.
s Press and hold the screen to turn the SoundTouch
™
system on and off.
s Press the screen to play or pause music.
s Touch and hold the SoundTouch
™
icon to disconnect the controller from a
system. To connect to another system, refer to the help system in the app.
Note: If the controller is in power saving mode, wave your hand
within 6 in. (15 cm) above the screen to turn it on.
Using the System
To Next Page
Loading...
Need help?
General
Weight and Dimensions
