Bose Wave SoundTouch IV series User Manual

English - 7
Setting Up the System
Unpacking the system
Carefully unpack the carton and confirm that the following parts
are included.
Wave
®
music system SoundTouch
™
pedestal
Remote control
(battery installed)
Demonstration CD
AC power cord(s)
USB cable
(computer setup only)
May ship with multiple power cords. Use the power cord for
your region.
Note: If part of the system is damaged, do not use it. Contact your
authorized Bose dealer or Bose customer service. Refer to
the quick start guide in the carton for contact information.
Save the carton and packing materials for transporting or storing
the system.
Placing the system
• To enjoy maximum audio performance:
— Place the system across the room from where you will
be listening.
— Place the system within two feet of a wall, and avoid placing
directly in a corner.
• Place the system on a flat, stable surface.
CAUTIONS:
• Do not place the system on a metal surface. It could interfere
with AM reception.
• Do not place the system on a heat-sensitive surface. Like all
electrical equipment, it generates some heat.
• Do not use the system in a damp location or any other place
where moisture can get inside.
Connecting the system to the pedestal
The SoundTouch
™
pedestal provides the network connection for
the Wave
®
music system.
1. Place the SoundTouch
™
pedestal on a flat, stable surface.
2. Carefully set your Wave
®
music system on top of the
SoundTouch
™
pedestal.
• Place the rear feet of the Wave
®
music system into the
recesses on top of the SoundTouch
™
pedestal.
• Make sure the Wave
®
music system sits flat and the side
edges of both units are aligned.
SoundTouch
™
pedestal
Place rear feet
into recesses
3. Insert the SoundTouch
™
pedestal’s cable into the Bose link
connector.

Bose Wave SoundTouch IV series Specifications

General

Brand	Bose
Model	Wave SoundTouch IV series
Category	Music system
Language	English