24
Personalising Your Wave
®
Music System
Français Español English
Adjusting the display brightness
The brightness level of the display automatically adjusts itself for low and high ambient light
conditions. This feature brightens the display for better visibility in high ambient light
conditions and dims the display making it less intrusive in low ambient light conditions. High
and low brightness settings can be set independently.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune/MP3
> five times until BRIGHT HI- is displayed.
3. Press Time – or Time + to set the high display brightness level to a value from 8-15.
4. Press Tune/MP3
> once until BRIGHT LO- is displayed.
5. Press Time – or Time + to set the low display brightness level from 1-8.
6. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the
set-up menu to end automatically.
Setting the room code
Your Wave
®
music system comes from the factory ready to operate as a second room (room
code B) when connected to a Bose
®
link enabled Lifestyle
®
system. If you want to use your
Wave
®
music system with your Lifestyle
®
system beyond a second room you will need to
change the room code to match that of the remote control you are using for that room.
Refer to your Lifestyle
®
system operating guide for more information on room codes.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
2. Press Tune/MP3
> seven times until ROOM- B is displayed. The dashes
following the room letter indicate how the microswitches should be set on the Lifestyle
®
remote control. See your Lifestyle
®
system operating guide for details.
3. Press Time – or Time + to select a room code other than room B.
4. Press Alarm Time (Menu) to exit the set-up menu or wait 10 seconds for the set-up
menu to end automatically.
00.BWMS_UKE.book Page 24 Monday, July 27, 2009 3:49 PM
To Next Page
Loading...
Need help?
General
