To Next Page

To Previous Page

Setting Up Your Wave

Music System

Français Español English

Setting the clock

After plugging in your Wave

music system, set the clock using the remote.

Your Wave

music system is easily operated using the remote control. Just aim the remote at the front panel

and press the buttons.

1. Press and hold Time – or Time + until

– CLOCK SET – appears on the display.

2. Press Time – to adjust the displayed time backwards or press Time + to adjust the

displayed time forwards until it matches the current time. You can also press and hold for

rapid adjustment.

3. Wait five seconds for the system to exit the clock set-up mode automatically.

To change the clock display from 12-hour (AM/PM) time to 24-hour (military) time, see

“Changing the clock time format” on page 23.

Note: In the event that the Wave

music system loses power, the clock time and other system

settings are stored in backup memory for up to 48 hours. This feature retains the systems

settings when you unplug and move the unit or when a power outage occurs.

Note: Press-and-hold operations require holding the button down for at least one second.

00.BWMS_UKE.book Page 6 Monday, July 27, 2009 3:49 PM

Bose Wave User Manual

Other manuals for Bose Wave