To Next Page

To Previous Page

DAY/ TIME

BACK NEXT

User Manual 16

Programming a 7 Day Residential Schedule

The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to

use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule.

Setting All 7 Days at Once (SpeedSet

)

NOTE: Setting all 7 days at once will copy over any previously programmed individual days.

1. Hold the PROG button

for 3 seconds. The display will

switch to SpeedSet programming mode. All 7 days

of the week will appear and the hour will be ashing.

2. Press SYSTEM to select HEAT or COOL.

3. Press the SpeedBar

up or down to adjust the hour

for the MORN (morning) event. Press NEXT.

4. Press the SpeedBar up or down to adjust the minute

for the MORN event. Press NEXT.

Press the SpeedBar up or down to adjust the

temperature

for the MORN event. Press NEXT.

6. Press the SpeedBar up or down to adjust the fan

setting for the MORN event. Press NEXT.

7. Repeat steps 3-6 for the DAY, EVE and NIGHT events.

8. If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).

9. Press RETURN to exit.

BACK and NEXT are

secondary functions of the

PROG and HOLD buttons.

Braeburn 5020 User Manual

Other manuals for Braeburn 5020