To Next Page

To Previous Page

DAY/ TIME

BACK NEXT

19 User Manual

Programming a 7 Day Commercial Schedule

The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to

use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule.

Setting All 7 Days at Once (SpeedSet

)

NOTE: Setting all 7 days at once will copy over any previously programmed individual days.

1. Hold the PROG button

for 3 seconds. The display will

switch to SpeedSet programming mode. All 7 days of

the week will appear and the hour will be ashing.

2. Press SYSTEM to select HEAT or COOL.

3. Press the SpeedBar

up or down to adjust the hour

for the OCCUPIED event. Press NEXT.

4. Press the SpeedBar up or down to adjust the minute

for the OCCUPIED event. Press NEXT.

5. Press the SpeedBar up or down to adjust the

temperature for the OCCUPIED event. Press NEXT.

6. Press the SpeedBar up or down to adjust the fan

setting for the OCCUPIED event. Press NEXT.

7. Repeat steps 3-6 for your UNOCCUPIED event.

8. If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).

9. Press RETURN to exit.

BACK and NEXT are

secondary functions of the

PROG and HOLD buttons.

Braeburn 5020 User Manual

Other manuals for Braeburn 5020