Braeburn 5020 User Manual

31 User Manual
AC Power Monitor
The AC Power Monitor feature is enabled in the Installer
Settings (See Installer Manual). If enabled, this feature will
automatically be present.
If your thermostat was hardwired (power provided from the system
with batteries as a backup) then the AC Power Monitor feature will
indicate when a loss of power to the thermostat has occurred by
displaying NOAC.
Indoor Remote Sensing
Indoor remote sensing is achieved by installing a Braeburn
®
remote indoor sensor and is configured in the
Installer Settings (See Installer Manual).
If a Braeburn indoor remote sensor was installed and properly congured in the Installer Settings, the thermostat
will sense temperature at a remote location or at a combination of a remote location and the thermostat location.
Figure 1
Figure 2

Braeburn 5020 Specifications

General

Brand	Braeburn
Model	5020
Category	Thermostat
Language	English