1.2 Front Side and Back Side
1.3 Rear Side Button
2. Installing & Replacing the Battery
To open the battery compartment of the remote control, press the battery cover and pull the
drawer out, Insert a CR2025 lithium button battery with the "+" side facing up. Close the drawer
3. Getting Started
3.1 Put the digital photo frame with installing bracket on a flat position steadily, then plug one end
of the AC adapter into a standard 110-240V AC electrical outlet and the other end into the DC
IN slot on the left side of the frame.
1. Motion sensor lens
2. IR remote control hole
3. SD/MMC card slot
4.
Audio output
5. USB(Type A)
6. Mini USB
7.
DC IN
1. Return
2. Up
3. Play/Pause/OK
4. Right/Volume-
5. Left/Volume+
6. Down
To Next Page
Loading...
Need help?
General
