Braun VitalScan 3 User Manual

9
!
3.
7 Sec.
3.
7 Sec.
3.
7 Sec.
1 2 3
Deleting all measurements
IMPORTANT: Before proceeding to clear all the memory, make sure you don’t have
to make reference to the readings in the future.
1. In shut off mode, press
button for at least 7 seconds until CL appears
in display.
2. When you release the
button, CL will flash.
3. Press the
button one more time and 3 short beeps will sound, CL will
disappear which indicates all stored readings have been deleted.
Battery charge indicator
Batteries almost discharged
When the batteries are approximately 75% used the
battery symbol will flash. The monitor will continue to
measure reliably, but new batteries should be obtained.
Batteries discharged—replacements required
!
When the batteries are dead, the battery symbol
will flash empty, display will go blank and 3 beeps will
sound. You cannot take any further measurements
and must replace the batteries.

Braun VitalScan 3 Specifications

General

Brand	Braun
Model	VitalScan 3
Category	Blood Pressure Monitor
Language	English