14
Error Description Potential cause and remedy
Blood pressure values
measured at your doctors
office
differ from your
measurements.
Doctor visits can frequently
experience anxiety.
Record the daily development of the
measured values and consult your
doctor.
Display remains
blank, or is unusual, when
instrument is switched on.
Batteries are not installed
properly.
Check batteries for
correct polarity.
Device frequently fails to
measure blood pressure
values, or values measured
are too low (too high).
Cuff may not be properly
positioned.
Check the positioning of the
cuff. See Cuff fitting on
page 10 for proper fitting.
Further information
Blood pressure is subject to fluctuations even in healthy people. Comparable
measurements always require the same conditions (quiet conditions)!
In order to receive market clearance from governmental bodies, this device was
subjected to strict clinical tests. The computer program used to measure blood
pressure values was tested by experienced cardiac specialists in Germany.
To Next Page
Loading...
Need help?
General
