SNMP
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
routers and Brother network-ready machines.
SSID
Each wireless network has its own unique network name and it is technically referred to as a Service Set
Identifier (SSID). The SSID is a 32-byte or less value and is assigned to the access point. The wireless network
devices you want to associate to the wireless network should match the access point. The access point and
wireless network devices regularly send wireless packets (referred to as beacons), which contain the SSID
information. When your wireless network device receives a beacon, you can identify the wireless network that is
close enough for the radio waves to reach your device.
Standard resolution
203 × 98 dpi (monochrome). 203 × 196 dpi (colour). It is used for regular sized text and the quickest
transmission.
Station ID
The stored information that appears on the top of faxed pages. It includes the sender’s name and fax number.
Status Monitor
The Status Monitor utility is a configurable utility to monitor the status of one or more devices, allowing you to get
immediate notification when there is a problem, for example, when the machine runs out of paper or jams.
Subnet Mask
A subnet mask allows you to identify which part of an IP address is used as the network address and which part
is used as the host address.
In the following example, the last segment of the IP address is known as the host address and the first three
segments are the network address.
Example: Computer 1 can talk to Computer 2
• Computer 1
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
• Computer 2
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
0 denotes that there is no limit to communication at this part of the address.
Super Fine resolution (Mono only)
203 × 392 dpi. Best for very small print and line art.
Home > Glossary
572
To Next Page
Loading...
Need help?
General
Weight and Dimensions
