In 341 mode, the white heads will not be purged automatically.
This means that the wiper will do his job in dry condition.
THIS WILL DAMAGE ALL WHITE PRINT HEADS WITH NO WARRANTY !
> NEVER CHANGE MACHINE MODE TO 341 MODE WHEN WHITE HEADS ARE IN THE MACHINE!
> 341 Mode should only be used when white printheads are NOT installed.
Maybe just at installation, when customer decides to use white ink much later
Company Name:
Representative:
Email address:
Phone number:
Daily Maintenance Regular maintenance
Preparation for Storage
+ Clean the Caps & Wipers
+ Insert Capping Cartridges
Every 2 Weeks
Side
W W W W
Side
C M Y K
White Tube Cleaning
Color Tube Cleaning
Preparation for Storage
NONE
NONE
NONE
Print W. Nozzle Check
NONE
> once a Week !
Side
Side
W W W W
C M Y K
White Tube Cleaning
NZC
Clean the Caps & Wipers
+ Load Wash Liquid in Caps
Load Maintenance Solution in White tubes*
+ Capping Cartridges
* via Load White and MNT Cartridge with MNT solution instead of White ink cartridge
+ in any case, clean the CLP of all Print Heads before storage!
[see page 10]
+ clean Wiper Blades & rubber Caps
[see page 4]
+ insert new Wiper Cleaners
[see page 7]
> If printer is only used for Color printing [no White]
C M Y K
> If printer will NOT work at all, for more than 2 weeks
Only
341 MODE
MAINTENANCE FOR LONG TERM STORAGE
MAINTENANCE BEFORE LONG TERM STORAGE
HOW TO CONTACT MY DEALER ;-)
CONTACT DETAILS OF BROTHER DEALER
CONTACT DETAILS OF BROTHER DEALER
13
To Next Page
Loading...
Need help?
General
