Brother GT-3 Series Maintenance Guide

MAINTENANCE PARTS EXCHANGE
> MAINTENANCE PARTS EXCHANGE PROCEDURE :
PH Cl.
80
The 2 wiper cleaners , the fan lter, the ushing tray sponge and felt pads, and the
carriage felt pads need to be replaced in the MPE procedure.
The prompt to “Exchange Maintenance Parts” will occur after EIGHTY head cleanings
(normal, powerful, or auto).
Normally after this amount of cleanings, the wiper cleaner will be saturated to the point
where the wiper can no longer be cleaned. When this happens, the nozzle plate will not
be cleared and the nozzles may be blocked or the ring may be misdirected.
Menu > Maintenance > Maintenance Parts Exchange > OK follow instructions and turn o printer
It is important that you use this menu and not another one to replace MPE
parts because it will reset the internal counter to zero!
!
7
> FLUSHING TRAY FELT & SPONGE REPLACEMENT :
Insert the felt into the ushing plate.
Place the sponge on top of the felt.
Install back the assembled ushing plate into the machine.
Check that the ushing plate is well inserted and sittting in
an horizontal position to avoid touching the PH’s in move-
ment !
+
SPARE PARTS NUMBER:
SB 3004001
+
SPARE PARTS NUMBER:
SB 3005001
REPLACE those 2
SPONGE & FELT
ACTION TIMINGPARTS
WIPER CLEANER
FLUSHING SPONGE
REPLACEMENT
REPLACEMENT
Display:
Wiper
Cleaner
Flushing
Sponge
> Replacing Consumables on the GT3
Replace the Wiper Cleaner
Display:
Replace Flushing Plate Sponge
ROLLER FELTS REPLACEMENT
Roller
Felts
Display:
Replace the Roller Felt
FAN FILTER REPLACEMENT
Fan
Filter
Display:
Replace the Wiper Cleaner
FLUSHING FELT REPLACEMENT
Flushing
Felt
Display:
Replace Flushing Plate Sponge
> Cleaning and Replacing Consumables on the GT3
Flushing Plate Sponge Exchange
Roller Felt Exchange
Wiper Cleaner Exchange
REPLACE THE FLUSHING SPONGE & FLUSHING FELT
REPLACE THE ROLLER FELT & FAN FILTER
Display Message : ACTION to perform :
CLEAN RUBBER CAPS & WIPER BLADES [to be done every weeks anyway]
REPLACE THE WIPER CLEANER+
REPLACE THE ROLLER FELT & FAN FILTER
+

Brother GT-3 Series Specifications

General

Brand	Brother
Model	GT-3 Series
Category	Printer
Language	English