Brother HE-800A Service Manual

2. DISASSEMBLY
HE-800A
34
2-12. Cutter mechanism (2)
1. Loosen the bolt (1).
2. Take out the solenoid plunger from the cutter solenoid (2).
3. Remove the four screws (3), and then remove the cutter solenoid bracket (4).
4. Loosen the set screw (5).
5. Loosen the two set screws (6), and then remove the cutter driving arm shaft (7) from the set screw collar (8) and
the cutter driving arm assembly (9).
6. Remove the four screws (10), and then remove the cutter bar guide (11).
7. Remove the cutter driving arm assembly (9) from the arm.
8. Remove the cutter driving link (12), the needle bar bracket slide block (13) and the driving shaft holder
assembly (14) from the cutter driving arm assembly (9)
9. Remove the washer (15) and retaining ring (16), and then remove the cutter link bracket assembly (17) from the
cutter link shaft (18).
10.Remove the three bolts (19), and then remove the cutter solenoid (2) from the cutter solenoid bracket (4).
11.Remove the spring washer (20) and the two nuts (21), and then remove the solenoid stopper (22) from the
solenoid plunger.
4116Q
4117Q
4118Q

Brother HE-800A Specifications

General

Brand	Brother
Model	HE-800A
Category	Sewing Machine
Language	English