CHAPTER 3 PCL5C - 11
3.5. Select Color
Command
ESC*v#S (27)(42)(118)#(83) <1Bh><2Ah><76h>#<53h>
# = 0 ~ current palette size
Default value = 0
This command selects the color as the index number in the palette.
This command is valid for text, underline, rule and graphics.
This command does not affect the User-defined color pattern or HP-GL/2. (The HP-GL/2 command selects
the color using the SP command.)
The value to be selected by this command is never affected by the Set PCL Color Setting, Set Render
Algorithm, Download Dither Matrix or Set Gamma Correction commands.
3.6. Push/Pop Palette
Command
ESC*p#P (27)(42)(112)#(80) <1Bh><2Ah><70h>#<50h>
# = 0 * Push palette
= 1 Pop palette
* Default value = 0
The value of 0 pushes the current palette onto the palette stack. This command does not affect the current
palette.
The value of 1 pops the palette from the top of the palette stack and replacesthe current palette with it.
If the Pop Palette command is executed without a Push palette having first having been executed, it is
ignored.
The palette stack is controlled as a First In Last Out stack.
The parameters below are pushed to the palette stack;
Color Mode (Simple Color / PCL Color Mode)
Parameters to be set by the Set PCL Color Setting command
Encoding Mode (mode 0, 1, 2, 3)
Bits / index
Bits / value #1
Bits / value #2
Bits / value #3
Black and White Reference
Parameter of Render Algorithm
Parameter of Gamma Correction
Color Palette
Dither to be downloaded by the Download Dither Matrix command
Pen Width (HP-GL/2)
The data below is pushed to the palette stack;
Colors to be selected by the Select Color command
Colors to be selected by the Set #1, #2, #3 command
Monochrome Print Mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
