Appendix (for USA and Canada)
127
C
Laser notices C
Laser safety (110 to 120 volt model only) C
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services
(DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and external
covers, the laser beam cannot escape from the machine during any phase of user operation.
FDA regulations (110 to 120 volt model only) C
The U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured
on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. The
following label on the back of the printer indicates compliance with the FDA regulations and must be attached
to laser products marketed in the United States.
Caution
C
Use of controls, adjustments or performance of procedures other than those specified in this User’s Guide
may result in hazardous invisible radiation exposure.
Internal laser radiation C
MANUFACTURED:
Brother Technology (Shenzhen) Ltd.
NO6 Gold Garden Ind., Nanling Buji, Longgang, Shenzhen, China
This product complies with FDA performance standards for laser products except for deviations pursuant to Laser
Notice No.50, dated June 24, 2007.
Maximum radiation power: 10 mW
Wave length: 780 - 800 nm
Laser class: Class 3B
To Next Page
Loading...
Need help?
General
Weight and Dimensions
