Brother HL-2150N User Manual

Routine Maintenance
69
5
Replacing the drum unit 5
CAUTION
While removing the drum unit, handle it carefully because it may contain toner.
Every time you replace the drum unit, clean the inside of the printer. See Cleaning on page 73.
When you replace the drum unit with a new one, you need to reset the drum counter by completing the
following steps:
a Make sure that the printer is turned on and the Drum LED is blinking. Open the front cover.
b Press and hold down the white Go button for about 4 seconds until all the LEDs light up. Once all four
LEDs are lit, release the Go button.
Improper Setup
Do not reset the drum counter when you only replace the toner cartridge.

Brother HL-2150N Specifications

General

Color	No
N-up printing	2, 4, 9, 16, 25
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	22 ppm
Internal memory	16 MB
Sound power level (standby)	27 dB
Sound pressure level (printing)	51 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Maximum print size	210 x 297 mm
Media weight (tray 1)	60 - 105 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Network ready	Yes
Supported network protocols (IPv4)	IPv4: TCP/IP, ARP, RARP, BOOTP, DHCP, APIPA, WINS/NetBIOS, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Port 9100, IPP, FTP Server, POP before SMTP, SMTP AUTH, APOP, TELNET, SNMP, HTTP, TFTP, SMTP Client, ICMP. IPv6: TCP/IP, NDP, RA, DNS, LLMNR responder
Power supply type	AC 220V 50/60 Hz
Power consumption (active)	460 W
Compatible operating systems	Windows Vista, XP(32/64 bit), Server 2003, 2000 Pro, Mac 10.2.4, Linux
Package weight	8400 g
Sustainability certificates	ENERGY STAR
Power consumption (off)	7 W
Power consumption (standby)	80 W

Weight and Dimensions

Dimensions (WxDxH)	368 x 361 x 170 mm