EasyManuals Logo
Home>Brother>All in One Printer>MFC-7365DN

Brother MFC-7365DN User Manual

Brother MFC-7365DN
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Routine maintenance
57
A
Replacing the toner cartridge A
Order Number: For the order numbers of
toner cartridges, see Replacing the
consumable items on page 56.
The Standard toner cartridge can print
approximately 1,200 pages
1
. The High Yield
toner cartridge can print approximately 2,600
pages
1
. Actual page count will vary
depending on your average type of
document. When a toner cartridge is running
low, the LCD shows Toner Low.
The toner cartridge that comes supplied with
the machine is a Starter toner cartridge that
will need to be replaced after approximately
700 pages
1
.
1
Approx. cartridge yield is declared in accordance
with ISO/IEC 19752.
Note
It is a good idea to keep a new toner
cartridge ready for use when you see the
Toner Low warning.
To ensure high quality printing, we
recommend that you use only Genuine
Brother Brand toner cartridges. When you
want to buy toner cartridges, please call
Brother Customer Service.
We recommend that you clean the
machine when you replace the toner
cartridge. See Cleaning the machine in
Appendix A of the Advanced User's
Guide.
If you change the print density setting for
lighter or darker printing, the amount of
toner used will change.
Wait to unpack the toner cartridge until
immediately before you put it into the
machine.
Toner Low A
Toner Low
If the LCD shows Toner Low, buy a new
toner cartridge and have it ready before you
get a Replace Toner message.
Replace Toner A
When the following message appears on the
LCD, you need to replace the toner cartridge:
Replace Toner
The machine will stop printing until you
replace the toner cartridge. A new and
unused genuine Brother toner cartridge will
reset the Replace Toner mode.
Note
To force the machine to continue printing
after the LCD shows Replace Toner,
set the machine to Continue mode (Menu,
1, 8, and choose Continue). The
machine will continue printing until the
LCD shows Toner Ended. (For details
about the Toner settings, see Toner
Settings in Chapter 1 of the Advanced
User's Guide.)
Toner Ended A
When the following message appears on the
LCD, you need to replace the toner cartridge:
Toner Ended
The machine stops printing until you replace
the toner cartridge with a new one. (See
Replacing the toner cartridge on page 57.)
Replacing the toner cartridge A
a Make sure that the machine is turned
on.

Table of Contents

Other manuals for Brother MFC-7365DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-7365DN and is the answer not in the manual?

Brother MFC-7365DN Specifications

Printing Specifications IconPrinting Specifications
print technologyElectrophotographic Laser
print speedUp to 24ppm
print resolutionUp to 1200 x 600 dpi
Copying Specifications IconCopying Specifications
copy speedUp to 24cpm
copy resolution600 x 600 dpi
copy reduction/enlargement25% - 400% in 1% increments
Scanning Specifications IconScanning Specifications
scanner typeColor Flatbed with ADF
document glass size8.5” x 11” (letter)
scan resolutionOptical: Up to 600 x 2400 dpi
Paper Handling IconPaper Handling
paper size maximumUp to 8.5” x 14” (legal size)
paper input capacity maximum250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum100 sheets (face down), 1 sheet (face up)
Weight and Dimensions IconWeight and Dimensions
unit dimensions15.9” W x 15.7” D x 12.4” H
unit weight25.6 lbs.
carton weight32.6 lbs.
carton dimensions20.7” W x 20.1” D x 19.4” H

Related product manuals