50
8
How to Dial 8
Manual dialing 8
Press all of the digits of the fax or telephone
number.
Speed Dialing 8
a Press (Speed Dial).
b Press OK and the # (pound) key, and
then the two digit Speed Dial number
using the dial pad.
Note
If the LCD shows Not Registered
when you enter a Speed Dial number, a
number has not been stored at this
location.
Search 8
You can search for names you have stored in
the Speed Dial memory.
a Press (Speed Dial).
b Press a or b to choose Search.
Press OK.
c Do one of the following:
To search numerically, press a or b
to choose the number, and then
press OK.
To search alphabetically, enter the
first letter of the name using the dial
pad, then press d or c to choose the
name, and then press OK.
Fax Redial 8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Black Start or Color Start to try again. If you
want to make a second call to the last number
dialed, you can save time by pressing
Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Dialing and storing numbers 8
To Next Page
Loading...
Need help?
General
