Brother MFC MFC-250C User Manual

56
10
How to copy 10
Entering Copy mode 10
Press (Copy) to enter Copy mode. The
default setting is Fax. You can change the
number of seconds or minutes that the
machine stays in Copy mode. (See Mode
Timer on page 20.)
The LCD shows the default copy setting:
1 Copy Ratio
2 Quality
3 No. of Copies
Making a single copy 10
a Make sure you are in Copy mode .
b Load your document.
(See Loading documents on page 17.)
c Press Black Start or Color Start.
Making multiple copies 10
You can make up to 99 copies.
a Make sure you are in Copy mode .
b Load your document.
(See Loading documents on page 17.)
c Use the dial pad to enter the number of
copies (up to 99).
d Press Black Start or Color Start.
Note
(MFC-290C only)
To sort your copies, press the
Copy Options key. (See Sorting copies
using the ADF (Black & White only)
(MFC-290C only) on page 61.)
Stop copying 10
To stop copying, press Stop/Exit.
Making copies 10
123

Brother MFC MFC-250C Specifications

General

Brand	Brother
Model	MFC MFC-250C
Category	All in One Printer
Language	English