36
To turn the mirror printing setting on or off:
1 While holding down c, press p once, and keep c held down to display the
current mirror printing setting.
2 While still holding down c, continue pressing p until the desired mirror printing
setting is displayed.
3 Release c to apply the selected mirror printing setting to the entire text.
EXAMPLE
Although the length of the printed label automatically adjusts to fit the length of the entered
text, there may be times when you will want to make a label with a specific length. The
Length function allows you to set the label length between 1.6” and 11.8” (4.0 cm and 30.0
cm).
The default length setting is OFF. When the Length function is set to ON, the Length indicator
on the right side of the display comes on.
To select the ON mirror printing setting:
1
While holding down c, press p once,
and keep c held down.
2 While still holding down c, continue press-
ing p until ON is displayed.
3 Release c.
To Next Page
Loading...
Need help?
General