SSS
™
1127
|
20
SSS
™
1127
Visit Static Control
®
on the web @ www.scc-inc.com
COLOR CALIBRATION PROCESS
OPTIONAL
Perform the calibration from the control panel of the printer:
The Color Calibration Process is recommended when
replacing toner cartridges:
1. Press + or - to choose COLOR CORRECTION. Press OK.
2. Press + or - to choose COLOR CALIBRATION. Press OK.
3. Press + or - to choose CALIBRATE. Press OK.
4. When the message OK appears on LCD, press OK.
Note: The printer automatically adjusts the color density
after calibrating from the control panel of the
printer. Do not calibrate using the printer driver
or from the status monitor.
To Next Page
Loading...
Need help?
General
