10. maintenance
safety
Check the safety of the Bugaboo Cameleon before each use. Ensure that the touch fasteners, the
brake and the safety belts are all working properly, the carry handle is attached properly and that
the bassinet or seat is fitted correctly to the chassis. Check whether the Bugaboo Cameleon is
damaged. You should ensure that any damaged or worn parts are repaired immediately
(See WARNINGS section).
parts
For replacements, use only genuine Bugaboo parts, or parts that have been approved by Bugaboo
North America Inc. To prevent mold, do not fold the Bugaboo Cameleon and accessories when wet
or store them in a damp place.
cleaning
To clean wheels, remove them from their holders and clean with a moist cloth, lukewarm water
and a mild cleaning agent, then dry well and lubricate them with a silicone spray.
NEVER lubricate the wheel bearings.
Important Some Bugaboo Cameleon components may become discolored if left in the sun.
cleaning the fabric
The Bugaboo Cameleon’s fabric is detachable and may be washed in a washing machine.
Wash carefully. Before washing, ALWAYS remove the frame, reinforcements and plastic foam parts.
Note When washing the fabric, remind the following:
- maximum temperature 30 ºC / 85 ºF (cold wash)
- do not use bleach
- do not tumble dry
- do not iron
- do not dry clean
The aerated inlay can be washed at 60ºC/140ºF (hot wash). At this temperature, the inlay will
become totally clean. The aerated inlay is placed on top of the thicker foam mattress and can
be taken of by removing the mattress cover. After washing the fabrics, ensure that all parts are
replaced in their original positions. The aerated inlay should be placed on top of the foam mattress.
Do not use the mattress without the aerated inlay.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
