12
Checking the Battery Level
Turn the Mode Dial to a shooting
mode.
•
The camera will then turn on and the
LCD panel will display one of the
following battery level mark:
: Battery level OK.
: The battery level is low. Keep
spare batteries handy.
: The batteries will soon be
completely exhausted.
: Replace the batteries.
• The battery life shown above is based on Canon’s testing
conditions with new batteries.
Battery Life (With 24-ex. rolls)
Temperature 0% Flash Use 50% Flash Use 100% Flash Use
At 20˚C 54 rolls 23 rolls 16 rolls
At –10˚C 35 rolls 16 rolls 11 rolls
Check the battery level after replacing the batteries and before
using the camera.
• If nothing is displayed on the LCD panel, the batteries may have
been installed incorrectly. Take out the batteries and install
correctly.
• If you often press the shutter button halfway for a prolonged
period or just autofocus without taking a picture, the battery life
will be affected.
• When not using the camera, set the Mode Dial to <
:>.
To Next Page
Loading...
Need help?
General
