29
The AF point is used for focusing. The AF point can be selected
automatically by the camera or manually by you. In the Basic Zone
modes and <Q> mode, the AF point selection is automatic only.
In the <T> <R> <E> <W> modes, the AF point can be
selected either automatically or manually.
• Automatic AF point Selection
The camera selects the AF point automatically according to
situation.
• Manual AF point Selection
You can select any of the seven AF points manually. This is best
when you want to be sure to focus on a particular subject, or to
compose a particular shot quickly.
1
Press the <3> button. (∫)
s The currently-selected AF point will
light.
2
Select the desired AF point.
•
While looking at the AF point on the
LCD panel or in the viewfinder,
press the cross keys to select the
desired AF point.
•
To select a horizontal AF point,
press the left or right cross key. To
select a vertical AF point, press the
top or bottom cross key.
•
You can also turn the <l> dial to
select an AF point.
•
If all the AF points light, automatic
AF point selection will be set.
•
Press the shutter button halfway to
return to shooting.
3Selecting the AF point
★
Automatic selection
Automatic selection
Automatic
selection
Automatic
selection
Select with cross keys
To Next Page
Loading...
Need help?
General
