55
appears.
In mode, adjust the volume of the
headphones with the [PHONES VOL.]
setting ( 90). In mode, adjust
the headphone’s volume the same way
you adjust the speaker’s volume
( 38). During slideshow playback,
push the joystick ( ) to adjust the
volume.
IMPORTANT
• When using headphones, make sure to
lower the volume to an appropriate
level.
• Do not connect the headphones to the
AV OUT/ H terminal if the icon does
not appear on the screen. Only noise
will be output in such case.
NOTES
• Use commercially available headphones
with a
∅ 3.5 mm minijack.
• Even if the AV OUT/ H terminal is set to
[ PHONES] during playback mode,
the setting will change to [ AV] when
the operating mode is changed to
or mode.
Using an External Microphone
You can attach a commercially available
microphone for recording movies.
When recording in very quiet
surroundings, the built-in microphone
may pick up the sound of the
camcorder’s internal machinery. In such
case, we recommend using an external
microphone.
Connecting a Microphone
Connect the external microphone to the
MIC terminal. Use commercially
available condenser microphones with
their own power supply. You can
connect almost any stereo microphone
with a ∅ 3.5 mm plug but audio
recording levels may vary.
IMPORTANT
Make sure to check the audio recording
level before recording with the external
microphone ( 88).
NOTES
When an external microphone is
connected to the camcorder,
[WIND SCREEN] will automatically be set
to [ OFF ].
TO ADJUST THE VOLUME OF THE
HEADPHONES
( 25)
COPY
To Next Page
Loading...
Need help?
General